Please note that this guide is provided as a general reference and in no way constitutes an official recommendation. We constantly update this list to cover more Audi error codes.
DL382 Code Names:
0CK*, 0DN: Front Wheel Drive *Also paired with Quattro on A6 / A7
0DP, 0CJ, 0HL (High Torque Capacity): Four Wheel Drive
DL382 – 7F – 7-speed dual clutch transmission 0CK
DL382 – 7Q – 7-speed dual clutch transmission 0CL
DL382 – 7A – 7-speed dual clutch transmission 0CJ
DL382+ – 7A – 7-speed dual clutch transmission 0HL (Piston 10% larger, one extra clutch plate per clutch, slightly modified flywheel)
Special Guide on Flywheel Noise
Error Code | DFCC | Fault Code Description | Symptoms | Correction |
P0718 (P071800) passive/sporadic | 20736 | Input/Turbine Speed Sensor “A” Circuit Intermittent | Replace Gear Actuator and TCU | |
P0811 (P081100) | 20870 | Strong clutch slip | Replace Gear Actuator and TCU | |
N/A | “P” Park not reliable / P slelcted but “N” displayed as the current gear / Doors cannot be locked from outside | Perform calibration of G676 | ||
P179F | 22345 | Parking Lock Mechanical Malfunction | Check Preussue Filter 2 on the valve body, make sure bolts are secured and not loose. If loose, replace pressure filter 2 and its bolts. If bolts are broken, replace valve body. If bolts are tight, replace Parking Lock Moduel N486 and Pressure pipe for N486. | |
P17F9 | 22345 | Parking lock Mechanical Malfunction | Perform accumulator hydrulic test; if test failed, replace accumulator | |
P0607 *(Valid if and only if it’s the only error code) | 21014 | Control Module Performance | Inspect transmission wiring harness (Incorrect grounding) | |
N/A | N/A | When in Gear 4 to 7 and RPM in range of 1700 – 2200, accerlation causes vibration or discomfort | Inpect and Replace Flywheel if needed | |
P17F9*(Valid if and only if it’s the only error code) | Check P17F9 code above first. | Check MTF and ATF oil level. If MTF oil level is normal, and ATF is less than minimum, add ATF. If MTF level is higher than maximum and ATF is low, check possible oil leaks between oil lines. | ||